• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When It's Time to Repair Windows

It's important to be careful when fixing your windows. First, put on a pair of cut-resistant gloves and safety goggles to prevent shards of glass from cutting you during your work.

Covering the crack with a plastic sheet over the crack is an easy fix for a cracked window. This will keep rain, snow and insects from entering the home.

Cracked Glass

Glass that has cracked can make your home look less appealing and let drafts to pass through. It doesn't matter if cracks result from an impact, like a baseball or Window Replacement near me soccer or a stress like a sudden temperature change, it is essential to have them repaired as quickly as you can in order to prevent further damage and to keep your windows functioning effectively.

Use clear tape to cover your damaged window if it's not damaged. It's an easy and affordable solution that can provide protection from water, dust, bugs and other debris and keep out the weather.

If the crack appears to be getting larger or has become extensive, it is best to consult with an expert. An experienced glazier can identify the root of the problem and recommend a suitable repair procedure.

A crack caused by an impact is the most frequent type of window break usually resulting from a solid object hitting your window with enough force to fracture it. These cracks usually display an arc of lines and broken pieces. They can be dangerous when they break loose. If you have double-pane windows this crack could compromise the gas layer between the panes and window Doctor impact the efficiency of your window's energy use.

Stress cracks are another type of crack that develops as a result of extreme temperature fluctuations and other environmental factors. These cracks start around the edges of your window, and eventually expand into full-blown break.

A pressure crack is a much more serious crack but it is still able to be repaired. It is typically a curvy line that extends across one or more sides of your window and can be the result of low or high air pressure that can cause expansion or contraction of the glass.

If you're looking to take a step beyond tape and nail polish, there are a few other products available for repairing cracks in your window glass. A product like Glass Repair Film is a bit more expensive but will provide more protection and durability for your windows. If you'd prefer to go the DIY option epoxy is a durable adhesive that can be used to fill in cracks to help prevent further damage and make your window look like it has never had cracks at all!

Leaking Windows

If you notice a damp spot under your window, or notice that the wood around it is weak or rotting, it may be time to consider a window repair. Mildew and mold thrive in humid conditions and can cause various issues within your home. They can lead to indoor air pollution, sagging drywall, and even increase the severity of allergies. If left unchecked they can cause structural damage to the home.

It's best to call an expert if water is visible or coming from the outside. Don't put off leaking windows. They're a major cause of mold and structural damage.

In many cases, a thin layer of caulking is all you need to stop the leaks. Before you apply the new caulking, you'll have to clean the area and remove any caulking that is in place.

Check the weepholes on the frame for debris. These holes are designed to drain rainwater, but they can also become blocked in time due to insect corpses or other debris.

If windows are double-paned it is also necessary to inspect the seal between the glass and the frame. This will help maintain a seal between the glass panes and make the windows more efficient. Over time the seal may wear out and allow water into your home.

Another sign of leaks is the appearance of water-based stains on the ceiling and walls. The drywall becomes discolored when it is soaked with water. Peeling paint is another sign of water affecting the adhesive properties of the paint and pulling it from the wall.

Faux Muntins & Mullions

In the past, mullions and muntins (or glazing bars in the UK) separated and held glass panes in classic multi-pane windows. Since bigger expanses of glass with tempered coatings became available following WWII, they fell out of fashion. They're mostly used as a decorative feature in a few older homes.

Sometimes it is the case that a small or even a single group of these wooden supports can get damaged by wind or rain leaving cracks in the window. The good part is that you can repair most of these rotting or brittle parts.

Clean the affected areas using a rag and an ammonia-based cleaner that won't leave a residue. Remove any rotting or loose components and use an exacta-knife cut the intersections between the vertical and horizontal painted window muntins. After you've trimmed the intersections, tape off the lower part of the window frame with painter's tape. Then, you can apply a heavy coat of white paint, paying particular attention to the areas that were lightly coated on the first coat. Allow the paint to dry completely before taking off the tape and applying a second coat.

If you have a more severe problem such as a crack that forms an hourglass shape in the middle of the window then it's probably better to replace the sash. In these instances it's crucial to find a replacement window that matches the style and size of the current one.

If you want to save money you can also put in an attached grid window. These windows are made of a glass pane that has a series of muntins that are glued on the surface. This gives them a divided appearance. They're not as efficient as traditional windows, but they are.

Installing a drip-cap will prevent water from leaking into the window frame. Most home centers sell these drip caps in aluminum for Window Doctor about $20. They're a lot easier to install than an alternative window sash and come with the same function as an authentic mullion or muntin.

Broken Sashes & Frames

A damaged Window doctor sash should be a signal that you should contact a professional. If left unchecked the broken sash may cause water leaks, wood rot and more serious problems with the frame and sill. If you've damaged your sash, replace it as soon as possible to ensure that the window is sealed.

Often, the problem is caused by worn out or poorly installed sash cords. It's simple to replace these cords in the majority of double-hung window models. First, you'll need to take off the metal tabs holding the sash. Push up on the other side of the sash (it isn't important which side) and then pull toward the opposite side to take it off. It is important to remove the parting strip that is what separates the sash from other to allow access to the location where the sash cords are located.

Once you've removed the sash, you must be sure to examine its metal tabs against those of your new sash. If they're not the same it can be difficult to put the new one in its slot and impact how the sash operates. Luckily, this is easily corrected by simply placing the tabs in their correct locations on your new window.

You'll need to check your window frame as well to look for any signs of damage or decay. This is a good thing to do regularly, as wood shrinks and wears down over time. If you find any visible damage, it must be repaired as soon as you can, to avoid the development of a larger issue.

If your window frames are deteriorating they can be treated with a homemade preserver created with half mineral spirits and boiled in linseed. After the treatment has dried for a total of two days, you are able to finish your frames with a high quality latex paint. A fresh coat of paint will also protect your window from the elements.