• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked?

There are several reasons why the ignition of your car could be locked. One reason is that the key is dirty or has a damaged wafer inside it. This can be fixed by sliding the key into and out of the cylinder several times.

Another possibility is that the pins in the lock cylinder have become stuck. You can make use of a small tack hammer to gently tap the cylinder to loosen the pins.

Check the Battery

If your car ignition switch replacement is in Park or neutral, but won't turn on when you insert the key into the ignition, it may be an issue with the shifter switch on the transmission. This can be repaired by moving the shifter upwards or downwards to get the car in gear.

If it's not turning, the problem may be with the neutral safety switch or transmission shifter cable. A mechanic or a local auto locksmith can fix these problems.

The ignition cylinder can also be worn out. In time, both the ignition and key may wear out and become difficult to insert or remove. A lubricant, such as silicon lock grease can address this problem, allowing the wafers to slide into place.

The key could get clogged by lint from your pockets as well as adhesive from tape used to keep packages in place. This prevents the key from sliding into the ignition. To fix this issue you can try cleaning the keys with a cloth or using an instrument cleaner, like Triflow. You should also make use of a spare key to determine if the issue is related to the key or the ignition.

While the key is in the ignition you can tap it using a a small piece of hammer. This can cause a small vibration that may cause enough friction to loosen the wafers in the ignition which will allow them to slide into place. However, you should be very careful not to damage the key or the ignition cylinder.

If all of the above options fail, it's probably time to call a locksmith or automotive mechanic to have it examined. It could be that the key has been damaged inside the ignition or it could be the time to replace the entire thing. Locksmiths can make an alternate key if the issue is the key. If the ignition cylinder is the issue then you'll need to take your car to a repair shop for it to be replaced. These issues are usually simple to fix.

Check the steering wheel

A locked steering wheel can cause the ignition to stop turning. It can happen if a driver accidentally engages the steering wheel when they exit or get into the vehicle. This is typically caused by pulling the wheel while being able to hold it against their body. It can also happen when someone in the back seat is unable to stop it when they exit the car ignition key replacement.

Luckily it's an easy fix that doesn't require a trip an expert locksmith or mechanic. First, check that the gear shift is in neutral or Park. If it's not then gently pull or push the gear shifter until it shifts to one of these positions. You should also activate the handbrake or press the brake before turning the key.

If the wheel is not locked, a quick examination of the steering column will determine if the key is in contact with the lock cylinder. This is usually identified by a small "Lock" label in the lower part of the ignition key replacement circle. You can easily disable this by gently moving the key or pulling it with moderate force. It is essential not to apply too much pressure since it could damage the key, or even break a wafer within the lock cylinder.

A spare key can also be used to disengage the lock. This may indicate that the original key has damaged and no capable of engaging the wafers inside the lock cylinder. A professional at Karl Chevrolet Webster City can make a new key ignition replacement if this is the case.

If the new key isn't engaging, a quick spray of penetrating oil can aid. Just apply a small amount around the ignition, and inserted keyhole, then jiggle or tap it lightly until it begins to work. If this doesn't work, you will likely need to see an expert at your local auto dealer. They can provide you with a replacement key and also replace the ignition cylinder if needed.

Check the Key

It is possible that your key may be damaged if it doesn't turn on. You can try getting rid of any foreign material that is on the key (lint, adhesive from packing tape, etc.). You could also try alcohol on the key or Goo Gone to see if it aids.

If the pins in the lock aren't moving correctly when you insert your key, it is possible that they are stuck. You can test an extra key by gently sliding it out of the ignition once you have insert it. This should allow you to feel and hear if the internal lock pins move, which they ought to. If you can't hear or feel any movement, you could grease them with graphite. You can purchase graphite in small tubes which can be sprinkled into the keyhole. This should help the pins to slide into position when you insert the key and also prevent them from becoming stuck.

A more serious problem is that it is damaged or worn out and is unable to engage the internal pins of the ignition cylinder. This could cause the cylinder of ignition to not to turn, preventing you from starting your vehicle. If this happens you'll need bring your car to repair or locksmith shop for service.

If you can turn your vehicle with a spare key and you've cleared the issue with the steering wheel or battery it could be because the ignition cylinder is worn out. You can try to loosen the lock with an abrasive screwdriver or handle of a small hammer. Do not use the head. Gently tapping on the cylinder can often release it and allow you to turn your key and start your car. If this does a new ignition switch require a new key not work it is necessary to replace the lock cylinder by an expert mechanic.

Check the Ignition Socket

The ignition socket is the place your key is inserted and slides out of place when you insert it. It is often gunked up with debris or simply the result of wear and tear. You can inject some silicon lock lubricant in the ignition.

You can also use a small hammer and tap very gently on the inside of the ignition in order to loosen or reset pins that are not aligned. Be careful not to overdo it as you could cause severe damage to the ignition switch.

Before you attempt this, ensure that the gearbox of your car is in neutral or park. Many modern cars have a system that can lock the steering wheel when it is not in neutral or park that can stop the key from turning into the ignition.

If you've done all of the above and still not able to get your key to turn, it is likely that the ignition cylinder housing is in need of replacement. It is important to know that different vehicles require different procedures for replacing the ignition cylinder.

Generally speaking, this involves removal of the plastic cover which is placed over the steering column and ignition assembly. To remove this cover, you will need to first adjust the tilt-wheel to its lowest position and then unscrew any fasteners that are holding it in place.

After you have removed the cover, you'll need to take off the old ignition cylinder from the steering column. It is then necessary to check the new one you bought with the old one to ensure that they are a perfect match. After this, you can install the new ignition cylinder the same way that you did with the old one.

Sometimes, despite all of our best efforts, the ignition may become damaged and need to be replaced. If this happens, it's recommended to contact a Tempe Locksmith for assistance. A locksmith can help you select the best replacement and install it correctly to ensure that your vehicle will start again.