• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will allow your vehicle to start.

Simple PIN code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking system can help you find your car in the event of theft, it can not prevent the crime from occurring in the first place. Immobilisers, on the contrary are exactly what they say on the label - they shut off your car's engine to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be done using the heater, window or indicator stalk buttons. Additionally, there is also an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is a great solution for those who want to offer your car to valet parking or for servicing. The immobiliser will stay active.

The ghost immobiliser fitter - Socialbookmark.stream, is an unique and innovative device that operates with the buttons on your vehicle rather than as a separate unit. It's not just an effective deterrent for vehicle theft, but it can also be used on any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch bmw m2 ghost installer immobiliser is a sophisticated security system that guards your vehicle from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be placed in the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It is also resistant to jamming devices, which is a common technique used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it runs silently compared to traditional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology and cannot be detected by traditional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons on your vehicle such as steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can create a sequence that is up to 20 presses long to provide additional security. The iPhone app only allows one connection, using a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to run when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with parameters set, such as 30mph speed limit), so you can give your car to valet or service without having to enter an entry code.

Tested for each vehicle

The autowatch ghost installers ghost immobiliser review is the world's first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a customized code. The system can be activated or deactivated via your smartphone's app, without the need for extra wires.

Standard factory immobilisers for automobiles function through a transponder inside the key that sends an indication to the ECU. The car will start when the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It protects you from hacking or key cloning and even key theft. Only by physically towing your vehicle away from thieves could they steal it and not be able to drive the vehicle.

Ghost makes use of the buttons on your car, such as the indicator stalk as well as the steering wheel and door panels to create an unique, changeable PIN code sequence that must be entered before you can drive. This is done without extra hardware, such as a keyfob. It can take up to 20 presses. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is concealed within the vehicle to ensure that it can't be taken away or disabled by thieves. It's even more difficult to get rid of than a car alarm that requires disarming with the use of a button sequence. This makes it a perfect complement to a GPS tracker which helps locate your car after it has been taken.

Override of emergency PIN code

You don't have to look far on social media for stories or videos of vehicles that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an additional layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel, and centre console. This unique PIN has to be entered along with your original key fob to stop the vehicle from getting started. The unique override pin is found on a black card that you will receive after the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the wiring of your vehicle and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a great alternative to an alarm.

In contrast to other security systems which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block a vehicle completely, by sending a digital block to the ECU and engine.

They can also be connected to a separate analogue alarm, immobiliser or tracker. This should be decided prior to installation. They also work with valet and service modes, and are a great alternative to a tracking device if you take your car into the dealer to address an electrical problem.

Service/Valet Mode

In recent times there has been a increase in vehicles being stolen with no owner's keys. With the ease of access to key cloning equipment and door lock pick sets it is now much easier for thieves to steal your prized possessions. We have developed the Autowatch ghost immobiliser fitting Immobiliser to combat this. It blocks your car from being driven, even if you keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop called CAN. It's completely silent since it doesn't use radio frequency or keys fobs. It isn't detected by diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is concealed inside your car using existing buttons on the steering wheel, centre console & door panels. A unique and changeable PIN code sequence of up to 20 digits needs to be entered prior to being able to start your car.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being moved away or even started if a PIN code isn't entered prior to. If you are driving away with the device arming it will display an indicator on your dashboard that will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run as normal. If you don't enter your PIN in this moment the indicator will continue to flash and require a new pin code every time you try to start your car.